Home > Unknown Error > Unknown Error 1011

Unknown Error 1011

Following Troubleshooting security software frequently resolves this error. Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to This happened on a Mac with TinyUmbrella running before restoring a firmware to the Apple TV. I'm using iphone 3GS. his comment is here

The Unknown Error 1011 error is the Hexadecimal format of the error caused. Ensure that communication to gs.apple.com is allowed. Welcome to the GSM-Forum forums. Return your device to Apple if possible. https://discussions.apple.com/thread/1157628?start=0&tstart=0

You need to disable both your Anti-Virus and your windows/security firewall in order for the update/restore to go through. 1 Use TinyUmbrella (Kick Device out of Recovery), iRecovery or redsn0w Lite Other Devices Restart computer; change computer; reinstall system, if the device is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually Check your security software If you see error 9, learn what to do. I've tried to redo and re-installed 3 times, but all in vain.

Error 1602 Restart computer; change computer; reinstall system. And Start each of the programs so it makes the iTunesMobileDevice.dll file. If you still see an error message, contact Apple Support. You will need to use a tool like independence (MAC) or jailbreak 1.1.2 (PC) to boot the phone out of recovery mode then your downgrade should be completed.

An unknown error occurred (1015).) this error message keeps popping up. Error 9 Due to asr being patched, the SHA signature is automatically changed and after being resigned the kernel will refuse to use it. Make sure only iTunes is running Step 3: Enter the phone in DFU mode (You must have the iPhone connected to the computer and iTunes running). Use default Theme.

If you still see the error message, you cancheck for outdated or modified softwareorcontact Apple Support. Error 1639: See this article for resolution. Error 13019 Seems to be an issue with syncing media to the device... Reconnect iPhone.

Error 40 Hacktivation bug in sn0wbreeze 2.0.1, which was fixed in sn0wbreeze 2.0.2. http://www.iphonehelpzone.com/post/iphone-2g-unknown-error-1011-baseband-dead.html Error -1 Error occurs when one uses the "last ditch" method for preventing baseband updates on the iPhone 4. Faulty baseband flash or processor Happens frequently after water damage. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device.

The dumb thing is stuck on restore mode and will not let me restore jailbreak or anything. this content Deselect all custom boot logos, recreate IPSW. Error 48 (or -48): Quit iTunes and discard the .ipsw file. You can try the DFU mode suggestion above and hope for the best.

If you don't have the SHSH blobs for the firmware you want, there is nothing you can do. I have restarted the iPhone and I have shut down and restarted the computer. Also, remove the IPSW and attempt to restore again. weblink See the section titled "Open the proper ports and allow access to Apple servers" in the Advanced Steps section below.

Download the correct firmware file that matches your device. Check forissues withthird-party security software. Update to the latest version of iTunes, thenuse recovery modeto restore your device to the latest version of iOS.

Recently, I updated to version 4.2.1.

Newer Than: Search this thread only Search this forum only Display results as threads More... iTunes can't connect to gs.apple.com. This error is frequently caused by third-party security software interference, a poor quality Internet connection resulting in a corrupted IPSW file, or a conflict with other devices connected to your computer If it's not in Recovery Mode,put it into Recovery Mode.

duplicate. You can't have both or else it won't work. Then, open iTunes and attempt to download again. check over here Restoring the device and setting up as new can resolve the issue.

If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. You are using the wrong firmware file (or it's corrupt). The firmware file's filename will contain the internal identifier of the device it's intended for. Can also be used to prevent a baseband update.

nothing happen when i click on install .... At first I thought the battery had just run out but then realized that this was not the case. However, the iPhone keeps saying "No Service". If this doesn't work, the memory of your device is damaged.

Error 1631: Insert SIM card into device and try again. Hex Codes 0x80090318 Something dealing with programs monitoring Winsock; see TS4123 for more information 0xE800000F Unknown error 0xE8000001 Device was suddenly unplugged. Error 50: This error (and error -50) are timeout errors. On the phones end: the quickpwn sign came up, the part where you see the running pwnapple and its loading came up and completes.

Device isn't bootable. 2 USB Problem. If you are using a custom Windows Theme Pack, revert to the default theme pack, restart, and try to restore. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com Need much more explanation. #3 Clayfree, Sep 29, 2007 ACIDMX New Member Bronze Joined: Sep 27, 2007 Likes Received: 0 Im not sure....

Registration is fast, simple and absolutely free so please - Click to REGISTER! when itunes started it said waiting for ipod for a while then an error came up saying sim card not there or isnt inserted properly or some crap like that..and NO This will bring up a browse box where you can select the firmware you wish to program. An Unknown error occurred (1011) Using latest version of Itunes 7.7.1 and restoring with latest iphone software 2.0.2 (screen shot attached below) 08-30-2008, 23:41 #4 (permalink) ihabz1981 Freak Poster

Try changing the USB port (the back one of chassis is better) and restart computer.